RCU Forums - View Single Post - My Laser Cut Air Boat PROTOTYPE
View Single Post
Old 09-15-2009, 11:00 AM
My Feedback: (14)
claserdesigns's Avatar
Join Date: Aug 2009
Location: Clermont, FL
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts
Default RE: My Laser Cut Air Boat PROTOTYPE

Wow, I just tested the other motor that I had a small 3,625kv inrunner and this thing really slide on the grass. But I aparently burn the motor because a funny smell came from the airboat, you can see on the second video that it starts to loose power, a few seconds later I got hit with the burn electronics smell. I think the 6x4 prop that I used is to big for this motor.

I tried to flip the AirBoat several times and nothing happend, I think the 6x4 propeller is perfect size for this Air Boat , but now I need to create the correct combo for the Motor (inrunner or Outrunner) and ESC.

It's hard to control the airboat and record at the same time, I'm using a Airplane stick controller

This is the motor I tested