RCU Forums - View Single Post - Couple questions about slash.
View Single Post
Old 10-19-2009 | 08:57 PM
  #23  
matthew__ruane's Avatar
matthew__ruane
Senior Member
 
Joined: Jul 2008
Posts: 244
Likes: 0
Received 0 Likes on 0 Posts
From: Hawthorne, CA & Buckeye, AZ
Default RE: Couple questions about slash.

Go to pfmdistribution.com, they were sold to some military contractor early last month and are selling all their stock for about 35-50% cheaper. I got a 3s 2200 LiMN for 30 bucks last month, theres a nice 3s 2800 for 50 bucks.

Their front site has been screwed for like forever and they never got around to fixing it so just use this link directly to the batt.

http://pfmdistribution.com/secure/sh...d=211&catid=47

Also get this soldering iron, you should get one and be able to solder if you stick with electrics. Should be easy to find at your local Radioshack. Also check out the instructional video on soldering on Traxxas website.

http://www.radioshack.com/product/in...ductId=2062738

Don't forget solder