I,m going to run a servo for each aileron , not sure on flaps yet . I,m sheeting the top and bottom of the center of the wing andglass it.. The plans call for using a balsa spar doubler on the bottom and a spruce doubler on the top. I use spruce for both doublers .Flaps are going to be 4 bays with a 3 1/2 in cord and the ailerons are 7 bays with a 3 1/2 in cord . Have a few idea,s about bolt on wing mod but nothing cast in stone yet.
Most of todays work was laying things out and trying to look ahead . Taking notes and making a list of steps I need to do . Like cutting holes in the ribs for the aileron servo leads , etc.
Here,s a link I found for flaps. and ailerons .
http://www.angelfire.com/indie/aerostuff/kadflap.htm
If anyone has any barndoor aliron/flaps mods ,please post them. Going to make a balsa run in the morning so I can get some work done. Well post more pics so.