RE: Eletronic engine syncronizer **SUPPORT **
Sorry for the delayed response... the web site is supposed to email me when some one posts on this thread and it didn't. You can use RPM mode on the glow drivers when only cranking by hand. The glow drivers turn on if memory serves correct at somewhere between 1000 and 1500 rpm for 20-30 seconds and then turn off above 3500 rpm. So what you do is wiggle the prop and they will come on and give you enough time to start by hand. Play with it on a bench a few times wile you can see the green and red leds and you will get the feel quickly as to how to turn them on for hand starting.