Just a quick note to advise you that this brand is much talk of it, well I have not listened and....:

My F15 is destroyed because the little hands of feibao forgot to paste the lines of drift and they are detached in flight, going to an flat spin in immediate and complete destruction of the cell.

Fortunately for me (all proportion kept time and investment devoted to this model) all the electronics and motor are intact, the motor is vent when we arrived on the scene of the crash so it will go just for a revision in rescue Turbines.

you tell me the model is old and over powered:
well no, it was only 5 flight of settings, so that the racetracks, and it was powered by a small P80 than enough to model and is perfect for the beginning.

good so I abused in flight .... bin rather than a transition to full throttle flat (all proportions guarded, given the strength of P80 and a model of 11.5 kg empty) one pass at full throttle and the drifts were blocked, you go tell me ill fitting, and there I respond through the pictures and you tell me more:



This is the only trace of glue on the axis of drift which is housed in the fuselage ....
here is the little extra glue on the other side:





given the manifest lack of editing, I thought Feibao, will take over and offer me something decent, well not even have the slightest beginning of commercial fiber: a fuselage (complete or not difficult to know) for 550€(825$)to home, without retract, tank and in my opinion no harware, no spoiler, however, added when ordering.

My friends, if you want to enjoy a little of your stream, choose the jetlegend (the club's powered by a 14kg and still around ....)
see the video mounted to appreciate the speed difference between the 2:
http://www.youtube.com/watch?v=1f6HnmUGnFc

You've been warned .!!!![:@][:@][:@]