I posted this on another Aurora 9 forum and got good partial answers but no banana.
I want to set up the throttle cut such that when I am at minimum throttle which is set
up for a slow idle ( no dead sticks ) with the carburetor slightly open that when I
activate H switch the engine stops. The trim will be about or above midpoint.
What I want is to simulate running the trim down to stop the engine but using H switch.
I also have set up a 7 point throttle curve that I think is working. Reverse on throttle
is set to Norm. This is an OS 95AX 2 stroke. The devil is in the details. I am looking
for someone who has actually done this.