I'm building my first plane to try to learn R/C flying. I have purchased a Wingo and have completed the construction of the plane. I am afraid I goofed on the purchase of a radio, however. The hobby shop person said I should go for a really good radio so I took his recommendation and bought a Hitec Eclipse 7 radio. When I read the instructions it is obviously way beyond my understanding. However, I think I understand that channel one of the receiver is for ailerons and is operated by the right stick moving right and left. Channel two is for elevator and is operated by moving the right stick up and down. Channel three is for the throttle and this is where the ESC is plugged and is operated by moving the left stick up and down. Channel four is for the rudder and is operated by moving the left stick right and left.