Hello to everyone!

I have a Heng long Tiger I, and recently I decided to install Elmod main board in combination with the Blaster III. I used a E-Sky 6 channel transmitter and receiver system (72Mhz) from an heli (economy is not great at home!jejeje).

The problems are: 1-Steering and accelerationThe motors doesn't move properly (when turn in any direction or move forward or backwards) they take time to move or only one motor moves very slowly.
2- Turret connection to the Think tank Board-Any one knows how to do a proper connection?I followed instructions from Elmod manual (I used the cable) I don't like it.
3- I am affraid that problem number 1 is related to the channel distribution on the receiverif that is the case any one knows how my transmitter works I want to know wich stick, knob or switch is associated to the channels.

Thank you in advance to all of you. I am very desperate, I want to see my Tiger move again!

Regards from Barcelona!