Sorry it took me so long to update this post. Its been in the teens temperature wise here, so the garage is a little cold. Finally wife gave in and allowed me to work on mustang in kitchen. I have the cowl completed. installed fuel dot, volt watch, switch and charging jack. Put together hardwood control rods. The rods came with shrink tubing to hold in wires to dowel, this was very inadequate, so i wrapped it with heavy duty carpet thread and Ca'ed it, very strong and looks much nicer. Installed pilot and canopy, control horns, battery and fuel tank. I will not be using a pump on the Saito .100 at this time, we will see if its needed, but i don't think it will be needed. Still need to fix landing gear covers, checkerboard bottom of wing, install receiver, adjust throws, break in engine an wait for warmer weather. Got a few pictures.
Dan