Hello Sushi2me,

First, thanks for responding. But I'm not sure if I'm communicatingy my problem accurately.

I read your message, but am baffled. I don't WANT to reverse anything. I just want the plane to fly. The propeller only works with that third switch is on reverse. I haven't flown the plane since the last crash and wanted to make sure it would fly like this before it -perhaps- crashes yet AGAIN.</p>

I need to read up to understand all this rc airplane jargon. When I move the throttle around (left-right-up-down) the corresponding parts wings and fin move accordingly. So I don't get what you mean about the 3rd channel controlling these movements. The first two channels seem to do this on this controler with this plane (wild hawk). It's when I push the red button to start the propeller that I run into this problem. On "reverse" the propeller works; on "normal "it does not. Prior to the last crash, it was working on "normal."


Thanks again and Happy New Year,
mejaydu</p>