RCU Forums - View Single Post - ROYAL - MARUTAKA and MK KITS COMPLETE LISTING

01-09-2010 | 02:55 PM

#1

CaptainBlueSky

Member

Joined: Apr 2009

Posts: 70

Likes: 0

Received 0 Likes on 0 Posts

From: , BELGIUM

ROYAL - MARUTAKA and MK KITS COMPLETE LISTING

Hello Royal/Marutaka fans, I am trying to compile a list of all models that were produced by Marutaka in OSAKA and distributed in the USA by Royal Products.
Mr. Masahiro Kato was responsible for designing and drawing the plans. Some of his warbirds were already sold before under his own kit label MK for M. Kato Model Aircraft Manufacturing Co. Ltd. Further on this later, I will make another list for MK kits.
Numbering has been sometimes confusing and it will need a separate list for Royal and Marutaka to clear this out. If you own a Royal catalog, an old Marutaka or MK brochure , please scan and email.
My informations are mainly coming from Marutaka.
I will edit and complete as informations become available. Please, feel free to post or email any error or missing datas

MTK-001 Mitsubishi A6M5 Type 0 model 52 "ZERO" or "ZEKE" FIGHTER 1:6 WS 1592mm 3.2- 3.5 Kg .60 2 cycles engine
Full scale. A = carrier-based fighter 6= sixth in this category to be built for the Imperial Navy M= Mitsubishi 5 = 5 th model

1:6 Royal/Marutaka plan slightly enlarged to 70" wingspan and scratch built by frets24

MTK-002 Mitsubishi A6M3 Type 0 "ZERO" or "ZEKE" FIGHTER model 22

1:8 WS 1480mm S 37,5 dm² Weight 2,6- 2,9 kg .40 2 cycles RC 3 - 5 servos

MTK-003 Mitsubishi "ZERO" FIGHTER
1:10 WS 1180mm S 23 dm² Weight 1,5- 2 kg .19-.25 2 cycles RC 3 - 4 ch

MTK-004 Nakajima A6M2-N "Rufe" FLOATPLANE: FIGHTER based on A6M-2 Model 11 with modified tail and floats.
1:8 WS 1480mm S 37,5 dm² 3,2 -3,6 kg .60 RC 4-5 ch.

MTK-005 Nakajima Ki-43 Hayabusa type 1 "Oscar", Japanese fighter plane 1:7.2 WS 1500mm S 40 dm² 3- 3,5 kg .60 RC 4-6 servos

MTK-006 JUNKERS JU87 D-5 STUKA (from Sturzkampfflugzeug which means diving bomber) 1:7.65 WS 71 " 760 Sq./in. .60 - .80 4-5 ch.

There is also a JU 87 B2 version, scale 1/8.3 WS 65 3/8 Surface : 697Sq./in. or 45 dm² 3.2 - 3.7 kg 78 lbs .60 engine and I have a KATO Model Aicraft JU 87 D-5 ( MK Kit) average scale 1:7.3 WS 1875 mm 51,4 dm² 4 kg

MTK-007 CHANCE - VOUGHT F4U-1D CORSAIR 1:8 1570mm 3,2-3,6 kg .60 4-6 ch.

Look at these flaps! Canopy is sliding to show full cockpit details, among others, a very good work ! One of Luke's masterpieces. Unfortunatly, I can't find his build thread anymore but Kelsey_B very kindly started this one [link=http://www.rcuniverse.com/forum/m_3919130/mpage_1/key_/tm.htm]Kelsey_B Corsair 60 Build thread[/link]

MTK-008 CHANCE - VOUGHT F4U CORSAIR .40 WS 1300 mm 31 dm² 2,5 - 2,8 kg

MTK-009 NORTH AMERICAN P-51D MUSTANG 1: 6.85 WS 1644mm 47,3 dm² 3,6 - 4kg .60 5-6 ch

MTK-010 NORTH AMERICAN P-51D MUSTANG 1:8 WS 1410mm s 37,2 dm² 2,6 - 3 kg .40 RC 4-6 servos

MTK-011 NORTH AMERICAN P-51D MUSTANG 1:9,6 WS 1175mm 24 dm² 2 - 2,5 kg .19 - .25 3 - 4 ch. .20

MTK-012 DOUGLAS C47 - DC3 1:13,7 WS 2112mm 49,5 dm² 3,8 - 5kg .35 - .40 x2 4 - 6 ch.

MTK-013 NORTH AMERICAN B-25 MITCHELL "Billy" WS 70 7/8" 1800mm , 750 sq in. 47 dm² 4,5- 4,8 kg .40 - .45 x2 4 - 6 ch.

MTK-014 CESSNA SKYMASTER 1:6 WS 1942mm S 52 dm² 2,8 - 4,8 kg

MTK-015 CESSNA 310 Q 1:6.86 WS 1850 mm S 46 dm² 4 - 4,5 kg 2 x .40

MTK-016 PARTENAVIA P- 68 VICTOR 1:7.5 WS 1600 mm S 33,55 dm² 2,8 - 3,3 kg 2x .19 - .25

MTK-017 Mc Donnell Douglas F-4 PHANTOM II WS 1200 mm Wing area 34 dm² 2.5 - 3 kg .40- .60 4-5 ch

First flight in 1958. Was still in service in 5 countries 50 years after! More than 5000 were built, until 1981 !

MTK-018 PITTS SPECIAL S-1 1:6,86 WS 1422mm 58,55 dm² 3,4 - 3,9 kg .50 - .60 4 ch.

MTK-019 PITTS SPECIAL S-2 1320mm 53,4 dm² 2,8 - 3,5 kg .40 - .60 4ch.

MTK-020 FOCKE-WULF Fw 190 A8 1:7 WS 1530 mm 39dm² 3,2 - 3,5 kg .49 - .60 4- 6 ch.

MTK-021 SUPERMARINE SPITFIRE MK8
1:6.9 WS 1637mm S 47.5 dm² 3- 3.5 KG .60 - .61 RC 4- 6 servos

MTK-022 GRUMMAN F8F BEARCAT 1:6,85 1580mm 47,5 dm² 3,5- 4 kg .60 - .80 4 - 6 ch.

MTK-023 CESSNA 172 1:8 1376 mm 25dm² 2 - 2,5 kg .19 - .25 3 - 4 ch.

MTK-024 Beech Craft D-17 Staggerwing 1 : 6,86 WS 1422mm S: 58,55 dm2 3,4 - 3,9kg .60 RC: 4 - 6

MTK-025 BLERIOT XI 1:6 1310mm 2 - 2,6 kg .40 - .50 3 - 4 ch.

MTK-026 ZERO FIGHTER A6M2 Type 0 model 21 1240mm 26 dm² 1,5 - 1,7 kg .20 - .25 3-5 ch.

Aichi D3A1 "Val" and A6M2 type 0 Model 21 replica ( Full scale flying model)

MTK-027 B-17E FLYING FORTRESS 1:16 1980mm 52dm² 4,5 - 5 kg .20 x4 4-6 ch.

MTK-028 PITTS Little Half ½A WS 800mm 21,6dm² 0,9 - 1,2 kg .10 - .15 3 - 4 ch.

MTK-029 Mini Devil sport WS 875mm surface 14 dm2 580 - 1000 gr. .06 - .09 2 - 4 ch.

MTK-030 Mini Bird sport WS 820 mm surface 12,8 dm2 400 - 600gr. .049 - .060 2ch.

MTK-031 Mini Bee sport WS 900 mm 14 dm² 550 - 700gr. .049 - .10 2 - 3 ch.

MTK-032 Mach Mini sport WS 800mm surface 13 dm2 400 - 650 gr. .049 - .06 2ch.

MTK-033 Mini Safe sport WS 900 mm 14 dm² 550 - 700gr. .049-.06 2 ch.

MTK-034 BLERIOT XI WS 1170mm 1 - 1,4 kg .09 - .15 2 - 3 ch.

MTK-035 ZERO FIGHTER A6M5-52 fuselage Epoxy 1:8

MTK-036

MTK-037 MESSERSCHMITT BF 109E 1:6,4 WS 1541mm 40dm² 3,3 - 3,5 kg .60 4 - 6 ch.

Another model built by Frets24

MTK-038

MTK-039 ZERO FIGHTER ½A WS 916mm 15dm² 0,8-1kg .051-.10 2-3 ch. .19-.35

MTK-040 NORTH AMERICAN P 51 MUSTANG ½A WS 900mm 14 dm² 0,7-0,9 kg .051- .10 2-3 ch.

MTK-041 CHANCE - VOUGHT CORSAIR F4U-1D ½ A 900mm 14,8 dm² 0,8-1kg 2-3 ch.

Thanks to Scale Dail

MTK-042 SUPERMARINE SPITFIRE MKI ½ A WS 900mm S 14,3 dm² 0,6-1 KG .051 .10 RC 2-36 ch

MTK-043 MESSERSCHMITT BF 109E 1/2 A WS 900mm 14,8 dm² 0,6 -0,8 kg .049-.10 2-3 ch.

MTK-044 Mitsubishi J2M3 Model 21 RAIDEN "Jack" WS 920mm 16,5dm² 0,8-1,2 kg .10-.15 3-4 ch.

MTK-045 ZERO FIGHTER WS 1200mm 24 dm² 1,7-2,2 kg .19-.40 3-4 ch.

MTK-046 KNIGHT WAY Sport WS 1200 mm 1 -1.5 kg wing area 27.6 dm² 0.20 - 0.25 3 - 4 ch.

MTK-047 BEECH BARON 1:6.85 WS 1790mm S 44dm² 4-4.5 kg .25-.40 RC 4-6 CH

MTK-048 PIPER SUPER CUP PA-18 Large Scale
1:4 WS 2680mm S 104 dm² 6-8kg .90 - 1.20 RC 4-5 CH

MTK-049 Mitsubishi J2M3 Model 21 RAIDEN "Jack" 1:8.5 WS 1270mm .25- .40 4- 5 ch. FRP molded fuselage

MTK-050 Mitsubishi J2M3 Model 21 RAIDEN "Jack" 1:7 WS 1543mm .60 6 ch. FRP molded fuselage

MTK-051 CESSNA L-019 Bird Dog Large Scale 1/5 WS 88.9 " 12 1/2 lbs 0.60 - 0.90 5 servos

MTK-052 CHANCE - VOUGHT CORSAIR F4U-4 1:11 WS 1135mm S 24 dm² 1,6-1,8 kg .20-.35 RC 3-4 CH.

MTK-053 MIGHTY KNIGHT Trainer - Stunt model WS 1180 mm S 26.6 dm² 1.4- 1.9 kg .19- .25 RC 3- 5 CH

MTK-054 KAWASAKI KI-61 "HIEN" " Tony" 1:9.14 WS 1390 mm 28 dm² 2- 2.2 kg .20- .25 4CYCLES .35-.40 4 - 5 CH

Mr. Kato behind his small size version of KI-61

MTK-055 CESSNA 500 CITATION 1:8.5

MTK-056 HOLIDAY trainer WS 1560mm S 37,5 dm² 2.1-2.7kg .25 - .40 RC 3-5 CH

MTK-057 F-4 PHANTOM Length 810mm wingspan 795 mm surface 15 dm2 650 gr - 850 gr. 0.51-0.10 2 - 4 ch.

MTK-058

MTK-059

MTK-060

MTK-061 MITSUBISHI T2 TOP GUN BLUE IMPULSE length 1038mm wingspan 980mm wing area 20 dm² 1.6kg - 1.8 kg 25 F 3- 4 ch.

This T2 is built by Mitsubishi under Jaguar License.

MTK-062 MITSUBISHI T2- F1 surface 39 dm2 3,3 – 3,5kg .40 - .50 RC 4 – 6 servos

MTK-063 LUCKY SUN trainer WS 1500mm S 40dm² 2.2-2.5kg .40 RC 4 CH

MTK-064 LOCKHEED P-38 LIGHTNING

MTK-065 CURTISS HAWK P6E Biplane 1:6 WS 1600mm 3,5 .- 4 kg .61 - .90 RC 4 servos

Thanks to Scale Dail

MTK-066 CHANCE - VOUGHT F4U-1A CORSAIR 1:5 WS 2498mm or 98 1/16" S 117 dm ² or 1,814 SQ IN 8- 10 kg or 18- 22 lbs gasoline 35-50 cc Large Scale

MTK-067 NORTH AMERICAN AT-6 Texan WS 1843mm S 50dm³ 3.5-4 kg .61-.90 RC 6 CH

MTK-068 BOEING pt-17 STEARMAN Biplane 1:5.65 3,9 -4,2 kg .61 - .90 RC 4 servos

MTK-069 SUN FISH Tail-less sport model WS 1180 mm S 32.2 dm² 1.2-1.4 kg .20-.25 RC 3-4 CH

MTK-070 REED FALCON Sport Biplane 3,8 kg .61 RC 4 servos

MTK-071 BOEING P-26A PEASHOOTER 1:5 WS 1700mm 3,8 – 4,3 kg .90 RC 4 – 5 servos

MTK-072 STINSON RELIANT SR-8 1:6 WS 84 1/3 " 4,5 - 5 kg .60 - .90 RC 4 - 5 servos

Copyright Mr. KianHong. Larger picture on http://www.airliners.net/photo....ot

MTK-073 ACROSTAR, Stunt trainer Fuselage Epoxy surface 69,5 dm2 5,9 – 6,5 kg .108 RC 5 servos

MTK-074 NORTHROP P-61 BLACK WIDOW
WS 1827mm S 51 dm² 4,5 Kg 040 X2 5-6 CH.

MTK-075 GRUMMAN F6F-3 HELLCAT 1:8 4 – 4,3 kg .60 - .90 RC 5 – 6 servos

MTK-076 Curtiss P40-E Warhawk FLYING TIGERS

That's all Folks !

NOT YET CLASSIFIED: Spirit of St. Louis, Cessna 206, Cessna 182 Skylane, Raiden all wood WS 1270mm, KAWASAKI KI61 HIEN ws 68 1/4 " ... + another Zero:MTK-??? Mitsubishi A6M3 "ZERO" or "ZEKE" FIGHTER WS 1680mm S 41 dm² Weight 2,6- 3 kg .40- .50 2 cycles RC 4 - 6 servos

Mr. Masahiro Kato was a top FAI pattern pilot who won many Japanese National championships.

As many high level modelers, he was designing and building his machines himself. After establishing his own company, named M. Kato Model Aircraft Manufacturing Co. Ltd, he began selling his MK kits.
Parts were all first quality balsa, pre-cut and many already pre-formed. A very high level of quality was achieved, Mr. Kato being without any doubt a very perfectionnist man, how could he climb to the first place in his country otherwise?

His main products line consisted of high level aerobatic models but he also designed some scale warbird. These were soon handed over to Marutaka, so he could concentrate himself on Pattern flight, altough he continued to design and draw many scale models for Marutaka. His first scale model MK kits were diffused in very small numbers and they did certainly not bring him much money, considering the high level of craftmanship involved. I will try to establish a list of the now very scarse scale models kits and also give an outlook of his long list of stunt champions, designed by M. Kato or by some of his fellow competitors.

MK very first scale warbirds designed by M. Kato:

ZERO

KAWASAKI HI-61 "HIEN" WS 70 "

JUNKERS 87 D-5 WS 1875 mm 4 kg .60

Reply Like