RE: 1/5 Hybrid Hellcat
Well Jeff, the model is 96 wide right? That is a scale of 1:5.35 - 60 inch in the that scale comes to 11.21 inches. But I measured not at the beginning/end of the cowl, my measurements started at 0.787 respective 3.773 inches.
Anyhow - to solve that could you measure the width of the firewall horizontal (at datum) and the width vertical (center) - would be nice.
Second question, how much for the fiberglass fuse of the F6F - i don't need plans for the wing or formers ect. thanks!