RCU Forums - View Single Post - Problem with Starting
View Single Post
Old 01-23-2010 | 06:33 PM
  #2  
ceecrb1's Avatar
ceecrb1
Senior Member
 
Joined: May 2008
Posts: 534
Likes: 0
Received 0 Likes on 0 Posts
From: Valencia, SPAIN
Default RE: Problem with Starting

for starters, welcome, however there is a car forum...

but...
sounds like the low needle is very close to where it needs to be but not exactly there yet..
Try letting it out in stages of 1/8th of a turn at a time.. maybe less... they are really sensetive so dont go doing 3 turns!

try maybe 4 times to get to 1/2 a turn.. each time give it time to see what the results are...

if it gets worse.. turn the other way..