RCU Forums - View Single Post - Futaba S3004 servos
View Single Post
Old 02-10-2010 | 08:13 PM
  #13  
glowhead
Member
 
Joined: Jan 2003
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
From: Vandalia, OH
Default RE: Futaba S3004 servos

My first S3004 failed, about 12 years of abusive flying. It doesn't have the speed, torque, tightness but they are one tough long lasting servo. You can improve their strength by using a 6volt RX battery pack. This is not over powering them. Look up the stats on Towerhobbies.com. You will see a torque rating at 4.8 volt and 6 volt. For a .60 size airplane, this could be recommended.