RCU Forums - View Single Post - Let's Talk About the Covering Sequence

02-21-2010 | 01:35 PM

#4

SeamusG

Senior Member

Joined: Jun 2007

Posts: 3,919

Likes: 0

Received 1 Like on 1 Post

From: Arvada, CO

RE: Let's Talk About the Covering Sequence

Here's a couple of detail pics ...

pic 1 - there's a bit of a finishing resin / microballoon fillet at the fin / fuse intersection
pic 2/3 - the control rod slots are wide enough to allow Hayes 2-56 clevis to pull through (hard CFrod)
pic 4/5 - bottom tank hatch detail
pic 6/8 - bottom servo hatch detail
pic 9 - stab &fin tip extension details
pic 10 - Robart hinge clearance
pic 11/12 - cowl detail - note the canopy. It has a raised balsa insert (black) that will provide for gluing point

Attached Thumbnails

Click image for larger version

Name: us54653.jpg
Views: 38
Size: 391.6 KB
ID: 1383842

Click image for larger version

Name: je98906.jpg
Views: 34
Size: 368.1 KB
ID: 1383843

Click image for larger version

Name: sx63150.jpg
Views: 42
Size: 385.1 KB
ID: 1383844

Click image for larger version

Name: ey69623.jpg
Views: 40
Size: 357.6 KB
ID: 1383845

Click image for larger version

Name: qb38529.jpg
Views: 41
Size: 378.5 KB
ID: 1383846

Click image for larger version

Name: wm84736.jpg
Views: 39
Size: 391.3 KB
ID: 1383847

Click image for larger version

Name: ln10120.jpg
Views: 36
Size: 372.8 KB
ID: 1383848

Click image for larger version

Name: cb94440.jpg
Views: 34
Size: 424.8 KB
ID: 1383849

Click image for larger version

Name: tr20336.jpg
Views: 39
Size: 337.1 KB
ID: 1383850

Click image for larger version

Name: nz19441.jpg
Views: 44
Size: 424.5 KB
ID: 1383851

Click image for larger version

Name: ch42653.jpg
Views: 35
Size: 414.4 KB
ID: 1383852

Click image for larger version

Name: xh40134.jpg
Views: 39
Size: 350.5 KB
ID: 1383853

Reply Like