RCU Forums - View Single Post - Nitro size air by nutech MMT
View Single Post
Old 03-01-2010, 11:06 PM
  #12  
mooman007uk
Senior Member
 
mooman007uk's Avatar
 
Join Date: Jan 2008
Location: parksville, BC, CANADA
Posts: 1,786
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Nitro size air by nutech MMT

upon strip down tonight the only nutech part i really need is a shock end did break 2 mount tabs off the fuel tank but there's still enough to be ok, ..after taking off my cage the chassis bow disappeared...rear end where the diff mounts is slightly tweaked but easily straightened...so i beat on my pipe and cage so all looks sweet, bit of final tweaking when it goes back together..so not really any damage for one jump outing really, and it was only the last bad landing that ended my day...so all considering I was pleasantly surprised.
If you think that's alot of damage for one outing Dan launch your "Cleon Beetle" WOT 10ft in the air and land on solid ground and tell me how much damage you incur