ORIGINAL: ram3500-RCU


I'll get you some pictures of the finished plane, when it is finished. The Flight video as well.

Here is that information on the plastic parts I used. They are made by a US company called Plastruct located in City of Industry, CA 91748. Their part numbers are as follows: Main part is called a Styrene Column 3/16'' or 4.8mm, part# 90545, cat No. HFS-6. The spacer part I added to this with CA is called Styrene Angle 3/32'' or 2.4mm, part# 90503, cat No. AFS-3. They were sold as packages, so I have enough plastic to make about 10 canopy systems now.