RCU Forums - View Single Post - FEJ 1/5,5 scale stabilator help required
Thread: FEJ 1/5,5 scale stabilator help required
View Single Post
Old 03-18-2010, 09:44 PM
  #18  
invertmast
My Feedback: (23)
 
invertmast's Avatar
 
Join Date: Dec 2003
Location: Capon Bridge, WV
Posts: 8,199
Received 225 Likes on 116 Posts
Default RE: FEJ 1/5,5 scale stabilator help required
Oli,
what if the pivot was located at roughly 22.5% MAC? From my research it seems that this is still within the acceptable range of 17-25% MAC for the pivot location, so i'm assuming that the stab will be slightly more unstable at this position than if it was positioned at 17 or 20% Mac... is my understanding correct on this?
invertmast is offline  
Reply Like