RCU Forums - View Single Post - engine not starting
Thread: engine not starting
View Single Post
Old 04-11-2010, 02:46 PM
  #9  
mecano
Junior Member
 
Join Date: May 2009
Location: , NM
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default RE: engine not starting
Sounds like you have low compression, it should be over 100 psi. If not, is probably time for a new top end (piston/ring, if cylinder is not damaged) . Check your air filter too, and make sure is not too wet.
mecano is offline  
Reply Like