I hope this is the right place to post this. First off, my 91 will not idle below 3200 rpm or it just dies. I have been through carb, adjusted valves everything I can think of this one has me stumped.
The tank is center to the nozzle, the motor is mounted at a 90 on a funtana x 50. Has new fuel line, I have tached it out at full rpm, then to idle to make the adjustments. Also it has a F plug, and I have tried 3 different ones, the fuel line is also short and direct.
Oh and one more thing the motor is not new and use to run great.

What gives?[sm=punching.gif]