<u>Step 3</u>:
After wax is applied, removed, and molds are buffed, allwith the same blue Scotts Shop Towels, it is time to put the molds on my spraying rack and apply a mist coat of PVA. Normally I use the Rexall, pictured below, but have also used TAP Plastics version. Steve Brownjust gave me an 8 oz. bottle (thanks Steve!), and I have a couple ounces left in an old 16 ouncer, too, so will kill off all the TAP Plastics PVA and getthese extra bottles out of my cupboards.