ORIGINAL: jauguston What is the thread sizefor the screw. I lost one and can't find anything that will fit. It is bigger than 2mm and smaller than 2.5mm. It is not 2-56. My caliper says the thread OD is 2.27mm measuring one from another servo. 2.5mm screws are 2.41mm OD.
Jim PS LOVE my Aurora 9 !!
2.3 x 5 mm Phillip-head screws.
<dt>
Servo - Hitec MG & Resin Horn Screw sizes
Hitec #55802 Screws for MG servos.
Regards
Alan T.
Alan's Hobby, Model & RC FAQ Web Links
</dt>