RCU Forums - View Single Post - Byron Originals Cap 21 Build
View Single Post
Old 05-07-2010 | 09:24 PM
  #147  
Revy's Avatar
Revy
My Feedback: (1)
 
Joined: Mar 2009
Posts: 775
Likes: 0
Received 2 Likes on 2 Posts
From: Revelstoke, BC, CANADA
Default RE: Byron Originals Cap 21 Build

I got the maiden in! Took it easy on the throttle advancing it initially. At 3/4 power it lifted off by itself! Climbed about fifteen feet, banked it to the right and away I went. A couple of clicks for the elevator, one for the ailerons and three for the rudder she was trackin' straight as an arrow! Nice flying machine! Vertical isn't foamy like but it is descent. Had a taste of the snap on some low speed passes, nothing too crazy that I can't handle with good throttle management. Landing was uneventful as I flew it in with descent speed. Three take offs and landings later I packed it up to head home to see what I used out of the batteries. Video tomorrow!

"Flyin' Pucks" it is!

Woo Hooo! Happy happy joy joy, happy happy joy....