Now with picprog4u this message shows after programming the PIC.
<span style="color: #ff0000">[15:14:04] Hex file successfully loaded.
[15:14:27] Programming device was begun.
[15:14:27] Erasing device.
[15:14:27] Erasing Data memory.
[15:14:28] Device was erased.
[15:14:28] Erasing device entirely.
[15:14:29] Device has been erased entirely.
[15:14:29] Writing into program memory.
[15:14:40] Writing into program memory finished.
[15:14:42] Writing configuration word finished.
[15:14:42] Writing into configuration memory finished.
[15:14:42] Writing into data memory.
[15:14:43] Writing into data memory finished.
[15:14:43] Programming device finished.
[15:14:43] Verifying device.
[15:14:48] Verify failed at address 0003h,required:1283, read:3FFF
[15:14:49] Verifying configuration word.
[15:14:49] Verifying failed! There are 577 error(s)!
[15:14:49] Verifying failed!

</span><span style="">I'm not getting it to work. Nothing happens power up the cdi.
What's wrong?
</span>