RE: TT 53 Redline leaning out
Hi Everyone
I changed setup to +12/-12 collective pitch and +8/-8 cyclic pitch and must say that now she performs very well with no bogging down. I made my low end another 1/8 leaner and high end also 1/2 turn leaner, massive increase in power with still slightly rich settings. had to decrease the throttle curve to 0, 48, 82 though just to keep head rpm at about 2050. governor still doesn't work even with the leaner settings. Mates trex with a tt 53 redline and hatori 523 pipe was still bogging abit but have some work to do on his engine. it starts, idle's great but very sluggish during transition, bottom of the high end seems to be lean but gets righer at the top of the high end. setting motor back to factory setting yields similar results. what could cause the engine to do this?
Cheers