RCU Forums - View Single Post - Engine Won't start
View Single Post
Old 07-21-2003 | 05:47 PM
  #3  
vegassky
Member
 
Joined: May 2003
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
From: Las Vegas, NV,
Default Engine Won't start

Hey
I haven't used the OS.. but i had similiar problems with a megatech ABC engine.
well it turns out the extra stiffness was due to too much oil in the engine. I took out the glow plug and turned the engine upside down and let the fuel flow out for about 5 minutes. Then connected the glow and hooked up the electric starter and it fired.
Hope that helps.. But if I am right the OS is not ABC so this may probably not help.