ORIGINAL: dmowery
Like the wheel part - My problem is where in heck do you put all the tools ya dont need but have laying around and extra stuff like wheels , parts motors and all the rest , mine take up the whole top of a full size door on saw horses and another folding 4 f ttable and I need aplace to hang or stack planes as I have a 4 x 8 sheet on couple horses to hold the planes , I know it takes up 1/2 the garage all summer - and ideas less the wifes would be appreachieted- dont ask what she said do with them
Don
A couple of years ago Home Depot had a metal 24" x 40" work bench for about $100 (I am not sure if it is still offered or not). The "workbench" had 3 drawers on one side, 2 drawers on the other side. I put 4 3" locking castors on it (to get it up to the height I wanted) and a piece of 3/4" particle poard 30" x 54" glued and bolted (recessed the heads of the bolts into the particle board) to the top. I topped that with a piece of sheetrock. The unit is not light, but it moves easily. My workshop is 1/2 of a 10' x 16' shed (the other half is for the riding mower, snow thrower, etc. It is a little tight, but very workable for up to 60 size planes (the planes are hung from the rafters in the shed).