RCU Forums - View Single Post - Engine
Thread: Engine
View Single Post
Old 07-24-2003 | 02:21 AM
  #5  
eracer_21
Member
 
Joined: Jul 2003
Posts: 36
Likes: 0
Received 0 Likes on 0 Posts
From: McCool, MS,
Default Engine

Thanks guys.

I am on 15% and dont care to use 30% for price and the extra smoke and dirt. The head turns very freely so does the tail. Head speed is about 1680 all through out the pitch range. blades are in track, fuel filter is clean, leaned out, etc. it just doesnt have the power to pull much pitch. Havent measured it lately but I set it at 9 to start and then had to go way down when I went to tuning. Pitch curve is almost flat from hover to full climb. Throttle is about 55% or so at hover and 100% at full climb. Just looking for suggestions.