Ok, what I did was pulled thecontrol armsoff, re did them so that both servo horns are level off the sevo's and the the control arms going upward at 90 degrees checkec for balance on all blades, tracking and balance on the flybar.
1st. try Smashed into the wall, any input into the chopper made it wobble. would hover kinda ok. but if i put any cyclic input into it. The chopper would move but wobbled when it did, literly WOBBLE. Plus terrible blade slap "thats what made me eat the wall" LoL
2nd. Put all old blades back on. Flew great, no wobble flies in any direction now and flies quickly forwards and in all other directions.
Conclusion: THESEBLADESSUCK!!!!!! I will sell them if anyone wants them
LoL
Thanks to everyone that helped though, part of it was though that my servo horns had gotton so far out of adjustment, once I looked at them and before I redid them, the swash plate was level but the servo horns were pointing at 5 o'clock on the right one and 7 o'clock on the left one.
Thanks again!!!!