RCU Forums - View Single Post - Converting from a 2-blade to 3-blade prop
Thread: Converting from a 2-blade to 3-blade prop
View Single Post
Old 06-23-2010 | 02:38 PM
  #7  
Sport_Pilot's Avatar
Sport_Pilot
 
Joined: Jan 2002
Posts: 16,916
Likes: 0
Received 1 Like on 1 Post
From: Acworth, GA
Default RE: Converting from a 2-blade to 3-blade prop
Actually the pitch by R squared would be a lot better ratio to compare. But as da Rock said, you don't have much to select from anyway.
Sport_Pilot is offline  
Reply Like