Hi Dave!

My experience is with the TP PL V2 4350 and 5300s. They both hold 33 to 34 volts in flight for my Intermediate Sequence and consistently show peak RPMs around 6100 to 6200 as logged by my Castle 80HV whereas the Rhinos and PUs show a consistent 34 to 35 volts in flight and hit a peak of 6300 to 6500 RPM. I don't have any experience with the PP30C 5000s. Are they markedly different than their PL brothers?



Also . . . speaking to the original question posted, I would mention that if weight is the primary issue, one can adapt 2x5s sets to come in at close to 1200g as shown below.


Joe