Hey there guys sorry for taking so long.
I have taken the boat to a boat building friend of mine. He cut off the rear wings and has taken out the servo box. At the moment we have moved the engine and re-set it up in the boat, about an inch back and a lot lower than before. I have a new driveline setup that will also be put into place as we are doing this.
The servo box will be repositioned once a few hull mods have been carried out but all work is going ahead really well.
I saw it for the first time last night and there is ample room to get to the fuel tank, which i had an issue with. I have a new strut and rudder so when i get it back it's going to need a few laps to start setting it up again.
Another main thing is we are changing the engine cover and going to make a new and smaller version to suit the boat, kind of change it from an unlimitied into a grand prix hydroplane look
ill try an upload some photos soon