Thank you Bob for the guidance. I surely don't want to screw up my tank! lol <div>This build is a fairly slow process....actually, I'm purposely making this slow. Little here, little there. It's quite pleasing....I almost want to sell it right after I build it and purchase another to start the build all over again. </div><div>
</div><div>One thing that I have noticed on my Pershing so far that isn't really a problem at this point, but looks like it could be an annoyance later on....the return rollers, once assembled are not meant to be taken apart again. I'm hoping that doesn't become an issue if dirt  gets trapped in there....or I ever need to re-lube the shaft. []</div>