RCU Forums - View Single Post - Gremlin help
Thread: Gremlin help
View Single Post
Old 07-17-2010 | 09:15 PM
  #36  
brnrbbr
My Feedback: (16)
 
Joined: May 2005
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
From: Townsend, MA
Default RE: Gremlin help

OK I managed to fly it tonight with a 10X5 prop and a 3 cell 2200 turnigy lipo. ( it was all I had) It launched good and had power that I say would equal a LA 25. Not a powerhouse but not bad either. I will have to try a 4 cell I think that will make it nice.
I built it with everthing that comes in the kit and it wieghed in at 2lbs. 11 oz. That was with low temp econocote not the packing tape.
The motor is from Hobby city - http://www.hobbycity.com/hobbycity/s...idProduct=5113
TowerPro Brushless Outrunner 3015-7 1000kv / 470W
HobbyKing 40A BlueSeries Brushless Speed Controller
http://www.hobbycity.com/hobbycity/s...dProduct=11430