RCU Forums - View Single Post - Earthquake 3.0 Advice
View Single Post
Old 07-27-2010, 01:49 AM
  #21  
rokit_armor
Member
 
Join Date: Jun 2010
Location: Manhattan, KS
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Earthquake 3.0 Advice

Agh this car is JUNK! I was just driving along and the steering QUIT WORKING causing me to HIT A CURB WOT flipping endos busting the body up!
j/k i've flipped this dang thing like a million times, hit way too many curbs, and have only bent the aluminum bracket that holds the lower a-arms in place. (and tore the body to shreds but whatever)
But seriously, I lost steering because the screw that holds the linkage on the.... uhm.. other linkage from the servo came undone.  I managed the find the 2 washers on the ground and the screw got stuck in the chassis, but i'm missing the brass collar that goes inside the deal.  I just hooked it  back up without the bushing deal and it works fine, a little loose on the steering but it's cool, not like it drove on rails before lol.

Stil havin tons of fun with redcat!