I have been using a Digipace 3 for many years, but have never had a Tx pack over 700mAh. I just acquired my first 1100mAh pack, and just realized that the Digipace's charging rate for the Tx is only 70 ma., so will not completely charge the 1100mAh pack in 16 hrs. I have about 10 wall warts, which all charge at 75 ma, which is no better except that I can charge for as long as I want to. My question is, how many hours should I charge this 1100mAh pack (assuming it has been discharged to 1.1 v per cell) using a 75ma output wall wart. I am also open to any suggestions to any new generation chargers/cyclers that would charge the higher mAh packs. I do have a dedicated lipo charger. TIA for any responses.


Lordmerren