RCU Forums - View Single Post - Revive old engines
View Single Post
Old 08-21-2010 | 02:38 PM
  #9  
sdad
Junior Member
 
Joined: Jun 2007
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
From: Grand Ledge, MI
Default RE: Revive old engines

Portland, Oregon. Beautiful!
Just returned from 6 weeks along the Oregon coast, all 3 areas. Wow!

Anywho.....thanks for the tips. My wife and I are doing a lot of extended time travels all over this country, and I decided that I want to bring along a couple of smaller(for me) planes, set up to convert between ground, water and snow. Hand launch when desperate! So the 20-30 lb'rs stay at home and an ACE 4-60 and a 40 sized trainer type will join us in the toad trailer. Will use 4-stroke for both convenience of fuel support and noise. Pulling a Fox 40 out of the trainer and replacing with an OS 48. 4-60 has Saito 65. I have a JR PCM10 that I will setup for both planes. I'm staying with 72MHz, have a couple of transmitter modules for channel selection. Hope to come up with a scanner to check for clear channel.