Problems Starting Savage
I am recently starting to chase a tune when I changed out my glow plug on my Savage 4.6 as the old one was burnt out. For the past year it has started within a few turns of the roto start.
After I put in a new plug (Duratrax LR3 hot) it would not start at all. Ispent 2 hours turning the roto start over an over. I put the needles back to factory setting (HSNflush and LSNflush according to the manual). Pissed off I called it a day and went home.
I tried it again inside my house and on the first turn it started right up! As soon as I was outside again it would not start. I leaned out the HSN little by little and still nothing. By then the roto start and the glow plug igniter had been drained.
Indoor temperature was around 77 degrees and outside was around 93 degrees. Am I adjusting the HSN incorrectly?