Ground Effect Airfoil Help
#1
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Bay area CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Ground Effect Airfoil Help
Hello,
my new project is for a WIG, ground effect plane, and i was wondering what airfoild anyone could recomend me?
i dont think a symetrical would work so i was thinking semi or flatbotom and if anyone has any specific ones that would be great too.
thanks
alex
my new project is for a WIG, ground effect plane, and i was wondering what airfoild anyone could recomend me?
i dont think a symetrical would work so i was thinking semi or flatbotom and if anyone has any specific ones that would be great too.
thanks
alex
#2
Senior Member
My Feedback: (1)
Join Date: Dec 2001
Location: CamborneCornwall, UNITED KINGDOM
Posts: 6,136
Likes: 0
Received 0 Likes
on
0 Posts
Ground Effect Airfoil Help
heres a pic of one type of WIG.
aerofoils seam to be undercambered and at a high AoA to trap air and force it under the trailing edge keeping the plane on its bubble of air, the aide plates obvisiouly stop it escaping out the sides.
If you want a plane style wig a Flarecraft style would be best. http://www.sfgate.com/hypertek/9703/flarecraft.shtml
a very simple type sits more or less on the water and uses a speed 400 to lift is just off the surface http://www.du-groundeffect.com/wig.html
aerofoils seam to be undercambered and at a high AoA to trap air and force it under the trailing edge keeping the plane on its bubble of air, the aide plates obvisiouly stop it escaping out the sides.
If you want a plane style wig a Flarecraft style would be best. http://www.sfgate.com/hypertek/9703/flarecraft.shtml
a very simple type sits more or less on the water and uses a speed 400 to lift is just off the surface http://www.du-groundeffect.com/wig.html
#3
Junior Member
Thread Starter
Join Date: Sep 2002
Location: Bay area CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
.
i have looked at those, but im going to build my own. im looking to find coor's for an airfoil so i can have it cut in foam for me. Somthing like this:
thanks
thanks