RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Aerodynamics (https://www.rcuniverse.com/forum/aerodynamics-76/)
-   -   Delta (https://www.rcuniverse.com/forum/aerodynamics-76/1451980-delta.html)

JeffH 01-21-2004 09:24 AM

Delta
 
Will a standard symmetrical airfoil work in a tailess delta layout? ie, a NACA 0016?

pmw 01-21-2004 09:37 AM

RE: Delta
 
JeffH

Yes a symmetrical airfoil will work well on a tail less delta. I've built and flown several Laser Arrows and the airfoil is symmetrical. They fly rock solid and float like a sail plane during landing. The only problem with any delta is the tendency to tip stall. I put wing fences and tip plates on the Arrow and solved the problem. Good luck

Paul

CafeenMan 01-21-2004 12:26 PM

RE: Delta
 
pmw - what's a wing fence?

BMatthews 01-21-2004 01:13 PM

RE: Delta
 
Symetrical is fine but you'll find you have to add a bit of up elevon trim for the reflex you need before your first flight. It won't trim with the elevons right on the center line.


All times are GMT -8. The time now is 04:32 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.