Futaba 2.4 recveiver placement in small airplanes. Receiver has 2 antennas
05-09-2024, 03:16 PM
#1
Junior Member
Thread Starter
Join Date: May 2024
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Futaba 2.4 recveiver placement in small airplanes. Receiver has 2 antennas
Can anyone display how you mount your Futaba receiver in a smaller air frame. This seems to be a struggle for me
05-09-2024, 06:12 PM
#2
----------------------------------
-----------|
----------|
The two dotted lines at top left are the antenna wires exiting the rx. One antenna goes straight forward
the other antenna bends across the fuselage width and bends aft as far as it will go.
\
-----------|
----------|
The two dotted lines at top left are the antenna wires exiting the rx. One antenna goes straight forward
the other antenna bends across the fuselage width and bends aft as far as it will go.
\
Last edited by WesternFlyer; 05-09-2024 at 06:17 PM.
