Model-tech Magic batt config.
09-04-2003 | 02:16 AM
#1
Thread Starter
Senior Member
My Feedback: (1)
Joined: Dec 2002
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
From: W. Bloomfield,
MI,
Model-tech Magic batt config.
I am picking up a Magic tomorrow. What batt configuration, flat pack or square are people using? I was also going to use a TT 46 Pro. Any other tips, suggestions?? Thanks 
Michael
Michael
09-04-2003 | 02:54 PM
#2
Senior Member
My Feedback: (16)
Joined: Mar 2002
Posts: 2,586
Likes: 0
Received 0 Likes
on
0 Posts
From: San Diego, CA
Model-tech Magic batt config.
I've heard of people using both ways. The square packs I've seen were mounted in a hatch cut in the bottom of the fus'. I have a flat pack mounted on rails above the servos. That way I could adjust the CG by sliding the pack back and forth.
FYI, with the OS 46FX, I had to add tail weight to mine. Not sure how it compares to the TT, though.
FYI, with the OS 46FX, I had to add tail weight to mine. Not sure how it compares to the TT, though.
