Has anyone built the h9 jackal 50 with a evolution 10cc ? I currently have it setup with the 60nx and tuned pipe and am switching to gas for reasons I'm sure you know why lol.
my question is where did you put the ignition at? I pulled the stock tank out and put a fourtitude 8oz in its place and am thinking of installing the ignition alongside of it, then running the spark plug cable out the bottom just in front of the firewall and running it to the plug. Any suggestion, comments, ideas or applause is welcome.
Other details include, AR8000, hitec 485 for surfaces and 323 for flaps, hobbico life 6.6v 2100 mah rx pack and a trakpower 6.6v 1900mah life for ignition.

I dont have the Jackal but if you are worried about where to place an ignition you could go with a glow gas engine.
If you decide to go with the evo 10 you could also use a ibec to lose the extra battery.
Just an idea in case you werent aware of the options.
Happy flying.