Durafly T28 Trojan
#1
Junior Member
Thread Starter
Join Date: Oct 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Durafly T28 Trojan
I just purchased a Durafly 1100mm T28 Trojan ARF and this is my first build. There seems to be two sets of leads coming from the servo's. One set has 3 pins and the other has 2 pins. Each set of wires is coded for the separate control surfaces. The manual has NO information on how to connect these wires to the Rx. Can anyone point me to a video or more complete manual that gives detailed step by step instructions on how to complete this build? I will be using a Spectrum DX7 Tx and AR8000 Rx.