UCD60
11-11-2003 | 03:45 PM
#1
Thread Starter
Senior Member
Joined: Dec 2002
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
From: Alpharetta,
GA
UCD60
Hey guys has anyone tried a 91FS in their UCD 60. I have a TT91 and a UCD60 just collecting dust, I was wondering if the 91fs would pull out of a hover or is it just to marginal. I planed to purchase a 91 or a 120 2c but thought sense I had this engine I might give it a try.
Thanks in advance
Thanks in advance
11-11-2003 | 04:05 PM
#2
Senior Member
My Feedback: (1)
Joined: Sep 2002
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
From: Leland,
MS
RE: UCD60
I'm running a ys91fz in mine and it will put out of a hover pretty decently. Anything less (four stroke wise) will probably be very marginal. I haven't payed too much attention to how the 2 stroke guys are doing so I can't help you much there. I'm sure one of them will chime in. There's a huge thread around here on the UCD, but you'll probably spend half the day looking through it. GOOD READING THOUGH.
11-12-2003 | 01:30 AM
#5
Senior Member
My Feedback: (5)
Joined: Sep 2002
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
From: Canastota ,
NY
RE: UCD60
ORIGINAL: SLINGSHOT-RCU
i think it will fly it well,,, i have a ys140 dz on mine it will hover at 1/4 thr pull out less then haft thro
i think it will fly it well,,, i have a ys140 dz on mine it will hover at 1/4 thr pull out less then haft thro
ya think! 140dz SICK!!
I have a Satio 100 on mine, 16x4 prop, loves to hover.
140DZ............crazy, would love to see a vid tho !!
