Ultra stick engine mount question
12-05-2003 | 05:14 PM
#1
Thread Starter
Senior Member
My Feedback: (2)
Joined: Nov 2003
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
From: Kennesaw,
GA
Ultra stick engine mount question
Does anyone know if the dave brown 46 sized engine mount will line up with the blind nuts that come pre-installed on the ultra stick 40? The one that came with it is really heavy.
12-05-2003 | 05:43 PM
#2
Banned
Joined: Oct 2003
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
From: Lansing, MI
RE: Ultra stick engine mount question
Look at this thread I started in ARF/RTF area. http://www.rcuniverse.com/forum/Bala...1325240/tm.htm
Here's another thread with a lot of mods for the US40 http://www.rcuniverse.com/forum/m_18.../tm.htm#187623
And here's an in depth build report where they balance one right: http://www.barnyard-buzzards.com/Bui...r/UltraStick40
Here's another thread with a lot of mods for the US40 http://www.rcuniverse.com/forum/m_18.../tm.htm#187623
And here's an in depth build report where they balance one right: http://www.barnyard-buzzards.com/Bui...r/UltraStick40
