Top Wing Fit-up problem
01-27-2004 | 12:58 PM
#1
Thread Starter
Junior Member
Joined: Sep 2003
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
From: Rockford,
IL
Top Wing Fit-up problem
Hello,
Anybody having a fitup problem with the three top sections? Mine has about a 3/32 gap at the trailing edge on each side. My guess is the center section isn't square. I'm going to call Great Planes and see what they have to say about it.
I'm going to use an OS BGX-1 glow engine with a Bisson muffler. I had this same setup on my GP Patty and it was excellent.
Anybody having a fitup problem with the three top sections? Mine has about a 3/32 gap at the trailing edge on each side. My guess is the center section isn't square. I'm going to call Great Planes and see what they have to say about it.
I'm going to use an OS BGX-1 glow engine with a Bisson muffler. I had this same setup on my GP Patty and it was excellent.
