Doe.s any one no for ??sure/// what oil content cool use's in there 10 % 15 cool and omega And more importantly WHAT
Oil and Viscosity/// Not all oils are the same !

I email Morgan fuels a few months back and got no answer !

I Was useing cool for years and switched to wildcat ...Last year I noticed My exhaust was black and nasty //
I saw heavy varnash on my rossi 45 after 3 to 4 gallons thru it.
I tore it down for a good cleaning / whew it was a mess .

Now I know this was, in part due to this motor runs a little on the hot side ///but this was heavy varnish !

I have since switch back to cool ,or omega when I can get it //
AND have been adding 2 oz of klotz and 2 of castor JUST as
added protection for my high rev engines

I have since found the exhaust less black And will post after a few gallons as to varnish build up


THANKs To ALL Ron

Your answers are on this link:
http://www.morganfuel.com/coolpower.htm
scroll down to the bottom of the page for the oil content.

Regards,

Lynn

Thanks Lynn
I take it those ratios are for cool and omega// where omega is
total of blend Do you know Omega's ratios of castor to sy?
Thanks a bunch Ron

70% -- syn.
30% -- castor
UPDATED

Ron,

rreiss's answered your query on the Omega. Cool Power is all synthetic, except for their 4-cycle fuel, which is the same 70/30 mix of oil, even they also list a new 4-cycle fuel which is straight synthetic.

Regards,

Lynn