Hanger 9 P-51 60 Help
09-03-2003 | 01:56 PM
#1
Thread Starter
Junior Member
My Feedback: (1)
Joined: Sep 2002
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
From: placerville, CA
Hanger 9 P-51 60 Help
I need help. I am building the H 9 P 51. 1-- The manual shows aileron servo in the star decal which would put the aileron control horn 3.5 in in on the aileron. mine is on the white part of decal so the mounting slot puts the servo and control horn about 2 in in. Also the retract servo is too low about 1/8 and the rods bind on the wheel wells. Do you add an extra servo mounting plate? Any Help Thanks so much joe
09-04-2003 | 10:26 AM
#2
My Feedback: (73)
Joined: Oct 2002
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
From: Stuart, FL FL
Hanger 9 P-51 60 Help
Hi Joe - your best bet is to call Horizon Hobby tech. support at 1-877-504-0233. They are very helpful and it's a free call.
Jeff Benko
Palm Beach Skyhawks
Jeff Benko
Palm Beach Skyhawks
