Need CG on SIG LT-40
#1
Thread Starter
Senior Member
My Feedback: (13)
I'm re-commissioning my grandson's trainer, after switching radio brands, and have lost my notes on it. Naturally, the book is long gone.
Anybody got the CG location handy? I seem to recall it is on the spar, but I'd like to be sure. This is the ARF, but I would imagine it is the same for both versions.
Thanks,
Steve
Anybody got the CG location handy? I seem to recall it is on the spar, but I'd like to be sure. This is the ARF, but I would imagine it is the same for both versions.
Thanks,
Steve
#5
Senior Member
My Feedback: (13)
Joined: Dec 2001
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
From: GA
3.5" - 4.25" behind leading edge of wing. Mine flew it's maiden flight yesterday, with the C.G. at about 4", and it was fine. I had about 3/4" of elevator throw (manual recommends 9/16"), and it was fairly pitch sensitive.
John
John



